[liberationtech] Deadline Extended: Call for C&T 2017 Workshop Papers - 3D printing and digital fabrication for education and the common good

[Konstantin Aal]

[Apologies for cross-postings]

We extended the deadline!

We invite contributors from academia, practice, activism and any other
communities to our workshop interested in 3D printing and digital
fabrication.

3D printing and digital fabrication for education and the common good
Workshop at the C&T 2017 – Technology for the Common Good

27 June 2017, Université de Technologie de Troyes (UTT), France
http://www.digifab-commongood.fab101.de/ <http://comtech.community/> 

==============================

About the workshop
==============================

 

3D printing has become an area of intense interest in a variety of
contexts in research and practice ranging from industry through
education, humanitarian to innovation. At the same time, technologies,
materials, usages and appropriation are in constant flux. 3D printing
is, however just one of the many facets of digital fabrication, the
digitalization of more and more sectors and increasingly community-based
innovation and open/commons-oriented engineering practices.

 

This workshop at C&T 2017 conference <http://comtech.community/> is
intended to illustrate and discuss /cases, positions, concepts and
experiences/ related to such developments in digital fabrication,
especially in 3D printing. We specifically look for contributions
highlighting the role of digital fabrication and 3D printing /for the
common good and in educational contexts/. Interested in participating
<http://www.digifab-commongood.fab101.de/participate>?

 

==============================

Important Dates
==============================

 

June 10, 2017: submission deadline¶

 

June 15, 2017: notification of acceptance / program update¶

 

June 26-30, 2017: Workshops at C&T (26th or 27th)

 

==============================

Participate
==============================

 

-       Position Papers outlining positions, stances and perspectives on
3D printing, digital fabrication and education and/or the common good.
Position Papers should be 1-3 pages in ACM SigConf format.

-       Case studies describing interesting, novel, provocative or
otherwise relevant cases of 3D printing and/or digital fabrication and
education and/or the common good. Case studies should be 4 pages maximum
in ACM extended abstract format.

-       Demos and hands-on artifacts/projects for the extended break. We
ask for a brief description (2-3 sentences) of what you intend to bring
with you as well as one photo (or sketch, drawing,...). If your demo has
special requirements, please also outline them.

 

==============================

Ogranizers
==============================

Oliver Stickel, University of Siegen (oliver.stickel at uni-siegen.de)
<mailto:oliver.stickel at uni-siegen.de%29>

Konstantin Aal, University of Siegen (konstantin.aal at uni-siegen.de)

Sarah Rüller, University of Siegen (sarah.rueller at uni-siegen.de)

Verena Fuchberger, University of Salzburg (verena.fuchsberger at sbg.ac.at)

Victoria Wenzelmann, Global Innovation Gathering (GIG)

Volkmar Pipek, University of Siegen (volkmar.pipek at uni-siegen.de)

Volker Wulf, University of Siegen (volker.wulf at uni-siegen.de)

Manfred Tscheligi, University of Salzburg (manfred.tscheligi at sbg.ac.at)
<mailto:manfred.tscheligi at sbg.ac.at%29>

 

For any questions please contact: oliver.stickel at uni-siegen.de
<mailto:oliver.stickel at uni-siegen.de>

-- 
Konstantin Aal
Research assistant and PhD student

Information Systems and New Media
SFB 1187 "Medien der Kooperation"
University of Siegen

Kohlbettstr. 15, 57072 Siegen
Raum. US-E-102
Tel. +49 (0)271 / 740 3383
Mob. +49 (0)176 / 30 780 007

http://www.uni-siegen.de/fb5/wirtschaftsinformatik/index.html.en?lang=en

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.stanford.edu/pipermail/liberationtech/attachments/20170607/378e2a6e/attachment-0001.html>